|
Hazardous Chemical Storage Buildings |
|
The system is far superior to any
others available today
"New
Generation" Construction Other MFG's use commercial
grade A-569 steel while ECP building are constructed with 12 gauge
non-commercial grade A-570 steel, which is of a higher
quality.
The coatings include two-part
anticorrosive epoxies and polyurethanes which serve as insulators from
climactic variations.
Buildings from some manufacturers
use less effective protective coating systems. The interior of their
buildings may heat or freeze according to outside temperatures.
- ECP buildings are designed on
the concept of palletized grids, utilizing space more
efficiently.
- ECP buildings are designed for
forklift pallet jack handling of drums. OSHA's policies discourage heavy
lifting that frequently results in back injuries. The 55-gallon drums,
when full, weigh from 400 to 700 pounds each.

The ECP coatings are extremely
effective in holding the interior of the building close to ambient
temperatures.

Secondary Containment Spill
Control ECP buildings
contain one-piece sumps with drain fittings to contain any leaks or spills
that might create a groundwater hazard.
 Model 10XR. Two door. For storage and
dispensing.
|
|

|
Model 10TDXR. Two door inside seismic storage
with secondary containment shelving. Temperature controlled, four
hour fire rated and explosion
relief. |
GSA Contract GS28F0020J

|
Environmental
Compliance Products
8907 Warner Ave.,
Suite 122 Huntington Beach, CA 92647 Toll Free: (800)
643-7065 Phone: (714) 847-4474 Fax: (714)
847-7554 Email: sales@hazmat77.com
Back to
top | |